current

Search

You can find the results of your search below.

C.H.I.P Computer @projects
12 Hits, Last modified:
I've written a shell script for reading voltage & current from the AXP209 Power Management IC * Battery charge % * Battery voltage & current * USB voltage & current * "ACIN" [[http://docs.getchip.com/#pin-headers|(Pin 2 of U13)]] voltage & current * and more... ==== Examples ==== <code> root@
ACS712 Current Sensor @electronics
5 Hits, Last modified:
====== ACS712 Current Sensor ====== {{:electronics:acs712_datasheet.pdf|ACS712 Datasheet}} ^ADC Resolution... | |8|195.313| ==== 12-bit ADC ==== ^Count^Voltage^Current (A)^Current (mA)^ |2048|2.500|0|0| |2049|2.501|0.01|12.21| |2050|2.502|0.02|24.41| |2051|2.504|0.04|36.62|... |0.11|109.86| ==== 10-bit ADC ==== ^Count^Voltage^Current (A)^Current (mA)^ |512|2.500|0|0| |513|2.505|0.05
Tiko @3d
4 Hits, Last modified:
utolevel??|na| |Yes|M906 E0.35|Set extruder motor current|na| |Yes|M906 D0.22|Set delta motor current|na| |Yes|M906 T0.22|Set current during travelling (G0)|na| |Yes|M204 P800|Set general acceleration|na| |Ye... by the manual extrusion override))| |No|M114|Get Current Position|| |No|M105|Get Extruder Temperature||
Lenovo T530 Laptop WiFi upgrade @projects
3 Hits, Last modified:
S and to attempt the whitelist modification on my current version, G4ET62WW (2.04). There are two flash me... , Take your time, don't rush</note> - Determine current wireless card VID:PID via Linux: lspci -nn (This ... ch involves placing kaptop tape over a pin) ==== Current Whitelist ==== TODO: Revise list as I made an err
Tenergy Li-ion 18650 Pack @electronics
2 Hits, Last modified:
th x 18mm Thcikness| |Weight|9.0 oz| |Max. charge current|1A| |Max. discharge current|3.5A| |Cut off voltage/Over-Charge Protection: 4.35V| |Over-Discharge Protecti
DVG-1120 @electronics:voip
2 Hits, Last modified:
-- User Commands activate Activate Current Config break Debug Breakpoint ... size nwdbg ether_status - display the current linking status of LAN and WAN ports. nwdbg host <
Embedded Linux computer with 1-wire net @archive
1 Hits, Last modified:
ablename` (`dt`, `hex`, `temp_c`, `misc`) VALUES (CURRENT_TIMESTAMP, \'$hex\', \'$Temperature\', NULL);";
Volt/Ammeter from eBay @ebay
1 Hits, Last modified:
V * Display screen: 0.28 inch LED * Operating current:<20mA * Measuring speed:≥ 500mS / times * Acc
405nm Laser Diode @projects
1 Hits, Last modified:
==== {{ :projects:405nmlaser:p1020989.jpg?400|}} ^Current (mA)^Voltage (V)^Power (mW)^ |30.0|4.10| | |40.0|
CarouselPi - A Kodak Carousel Slide Scanner @projects
1 Hits, Last modified:
* 10 Watt RGB LED - Light source (300mA forward current per channel) * [[https://www.sparkfun.com/produ
Fluke 189/187/89-IV/87-IV Remote Interface Specification @reference
1 Hits, Last modified:
{key code} parameter can not be used due to the current mode of the meter, a CMD_ACK of '1' is re
DGPS-11 Beacon Receiver @projects:electronics
1 Hits, Last modified:
ind a supplier. Or buy it off of eBay for $30. **Current Status: Found the MC145157 chip** ===== Componen
Touch Sensor @projects:electronics
1 Hits, Last modified:
==== Touch Sensor ==== **Current Status: Prototype** {{youtube>large:LtHRDSMwfJU|Capacitance based light