Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Formatting Syntax @wiki
- If you want to try something, just use the [[playground:playground|playground]] page. The simpler markup is easily accessible via [[doku>toolbar|quickbuttons]], too. =====
- IO Board @projects:electronics
- ay board^Signal Name^Pin^#^Pin^Signal Name^ ||Gnd|Ground |B1 ^#|A1 |-I/O CH CK|I/O channel check; active l... onnected|+12 V dc |B9 ^#|A9 |SD0 |A8 on U24| |Gnd|Ground |B10^#|A10|I/O CH RDY|n/c| |B2 on U23 - not used|... on U22| |n/c|OSC |B30^#|A30|SA1 |A2 on U22| |Gnd|Ground |B31^#|A31|SA0 |A1 on U22| ====== IC's ====== ^
- Vehicle
- lay}} ^Contact^Note^ |85|Coil - Switched by ECM, ground to activate| |86|Coil - 12v switched with ignitio... utput to Rear Defroster - 0v, 3 ohm resistance to ground| |87a|n/c| <HTML><BR></HTML> {{ :taurus:rear_de
- test
- height: 300, theme: { shell: { background: '#8cacbb', color: '#ffffff' }, tweets: { background: '#dee7ec', color: '#000000', links:
- Ferrofluid @projects
- ;"><tr><td align="center" style="height:194px;background:url(http://picasaweb.google.com/f/img/transparent_album_background.gif) no-repeat left"><a href="http://picasaweb.go
- Fixing a Garmin USB charging cable @projects
- iusbpinout.png|Miniusb Pinout}} ^Pin^Function^ |1|5v Power| |2|n/a| |3|n/a| |4|17.3K to Ground| |5|Ground|
- DVG-1120 @electronics:voip
- oip:rj11m.gif|}} ^RJ9^Colour^Function^Pin^ |1|Blk|Ground| |2|Red|RX (Data to Computer)| |3|Grn|TX) |4|Yel|... d|TX (from computer)| |Grn|RX (To Computer)| |Yel|Ground| ===== Commands ===== ^Command^Function^ |spy 16
- DGPS-11 Beacon Receiver @projects:electronics
- | Black|- Negative| | Blue|TTL Out| | Green|Data Ground| | Brown|Shield Ground| How can I tell if my WAAS GPS is giving me a corrected fix? Look for a "D
- GPS @projects:electronics
- nge|3.3V| | |Green|3.3V| | |Red|0V| Referenced to Ground {{:projects:electronics:gps:tek0006.jpg?300|}} ... OS/TTL| |7|RXD 2|Port 2 receive, CMOS/TTL| |8|GND|Ground, Power and Signal| 5V @ 200mA, less than 100 mV
- CadSoft EAGLE Libraries
- box 60%> I've included a keepout block to prevent ground planes or traces from being routed under the ante
- Light Sensing @electronics
- hm resistor & an LED [[http://www.arduino.cc/playground/Learning/LEDSensor]] ====== Phototransistor ===
- VFD Display board @electronics
- ====== VFD Display board ====== [[https://playground.arduino.cc/Main/HpLaserJetControlDemo|HP Laserjet c
- google @playground
- > </HTML> pageTracker._trackPageview(); {{:playground:bus_terminal_to_fine_grind_directions.jpg?200|}}
- PlayGround @playground
- ====== PlayGround ======
- 405nm Laser Diode @projects
- gif?100|}} ^Pin^Description^ |1|Anode(+)| |2|Case Ground| |3|Cathode (-)| |4|nc| ===== Diode Driver =====