Search

You can find the results of your search below.

IO Board
3 Hits, Last modified:
ay board^Signal Name^Pin^#^Pin^Signal Name^ ||Gnd|Ground |B1 ^#|A1 |-I/O CH CK|I/O channel check; active l... onnected|+12 V dc |B9 ^#|A9 |SD0 |A8 on U24| |Gnd|Ground |B10^#|A10|I/O CH RDY|n/c| |B2 on U23 - not used|... on U22| |n/c|OSC |B30^#|A30|SA1 |A2 on U22| |Gnd|Ground |B31^#|A31|SA0 |A1 on U22| ====== IC's ====== ^
DGPS-11 Beacon Receiver
2 Hits, Last modified:
| Black|- Negative| | Blue|TTL Out| | Green|Data Ground| | Brown|Shield Ground| How can I tell if my WAAS GPS is giving me a corrected fix? Look for a "D
GPS
2 Hits, Last modified:
nge|3.3V| | |Green|3.3V| | |Red|0V| Referenced to Ground {{:projects:electronics:gps:tek0006.jpg?300|}} ... OS/TTL| |7|RXD 2|Port 2 receive, CMOS/TTL| |8|GND|Ground, Power and Signal| 5V @ 200mA, less than 100 mV
Optical Mouse
1 Hits, Last modified:
as shown on the right. ^Color^Function^Pin^ |Red|Ground|Gnd| |Black|SCLK|RC3| |Orange|5V Power|5V| |Yello
Optrex IM50240 Display
1 Hits, Last modified:
50% duty cycle| |5|n/c|| |6|VCC|| |7|IC GND & VEE|| |8|"Clear" Button|| |9|"Secure" Button|| |10|Ground||
Panel Meter Interface
1 Hits, Last modified:
input| |6|SHDN|Hardware shutdown| |7|AVss|Analog ground| |8|VoutA|DACa Output| **PIC Assembly Code**
Serial Converter
1 Hits, Last modified:
|3 |Brown |TD (Data from PC) | |4 |N/C | |5 |Red |Ground | |6 |Orange |DSR | |7 |Yellow |RTS | |8 |Green |
Stepper motor driver
1 Hits, Last modified:
|3|L298-Pin3-Output 2| |4|L298-Pin2-Output 1| |5|Ground?| |6|Logic?| |7|Logic?| |8|Logic?| |9|Logic?| =
USB Serial Adapter
1 Hits, Last modified:
} 3.3V Logic ^Wire^Function^ |Yellow|DCD| |Brown|Ground| |Orange|RX (To Computer| |Purple|RTS| |Red|TX (F