Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== WET610N ====== telnet <ip_address> 1111 system telnetd telnet <ip_address> root password: wlan === Serial boot log === 38400,8N1 3.3V logic <code> U-Boot 1.1.4 (Jun 19 2008 - 14:02:55) U-Boot code: 00000000 -> 0001C1F0 BSS: -> 00021498 CPU Clock: 200 MHz 1.8V Vdd Output: 1.793 2.5V Vdd Output: 2.531 ==== PCI Device List Start ==== bus:00 device:01 function:00 vendor:1a30 device_id:0680 class:0d80 interrupt:06 ==== PCI Device List End ==== RAM Configuration: Bank #0: 00000000 32 MB Flash Manufacturer: EON Flash Device: ENLV320B(4MB) Flash: 4 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 Verifying image integrity. Good checksum ## Starting application at 0x10040000 ... Uncompressing Linux............................................................. Loaded GPIO driver </code> projects/wet610n.txt Last modified: 2014/11/13 10:50by 127.0.0.1