set

Search

You can find the results of your search below.

Fulltext results:

Panel Meter Interface @projects:electronics
3 Hits, Last modified:
clk macro BSF PORTC,SCK BCF PORTC,SCK endm ;Setup direction BCF TRISB,RB1 ; RB1 as Output BCF ... SDO as Output BCF TRISC,SDA ; SCK as Output ;Set initial pin states BSF PORTB,RB1 ;Chip Select, ... 1,F,A RLNCF DAC+1,F,A RLNCF DAC+1,F,A RLNCF DAC+1,F,A BSF PORTB,RB1 ; Set CS high return </code>
C.H.I.P Computer
2 Hits, Last modified:
C~~ ====== C.H.I.P Computer ====== ===== Headless Setup ===== - Connect CHIP to your Linux computer v... C registers, everything else is only reading ==== Setting VBUS current limit ==== * i2cset -y -f 0 0x
Tire Pressure Sensor Code @projects:electronics:tirepressuresensor
2 Hits, Last modified:
2C_AckWait movf _Error,F,A ; If _Error is set, change output to --- btfsc STATUS,Z goto n... ' ' Skip_Blank movf _Error,F,A ; If _Error is set, change output to --- btfsc STATUS,Z goto N
405nm Laser Diode
1 Hits, Last modified:
projects:405nmlaser:p1020543_cropped.jpg?200|Same setup, just with lights on}} {{:projects:405nmlaser:i
Transmission Holograms
1 Hits, Last modified:
tp://picasaweb.google.com/photonicsguy/HolographySetup">Holography Setup</a></td></tr></table> </html>
Lenovo T530 Laptop WiFi upgrade
1 Hits, Last modified:
ory chip on the underside which contains the bios settings and password which I don't need to touch. T
50 Amp 5 Volt Power Supply @projects:electronics
1 Hits, Last modified:
ply.jpg?500|}} Need a 208.76 ohm, 1% resistor to set the 5V output. Right now I'm using a 500 ohm pote
IO Board @projects:electronics
1 Hits, Last modified:
1|IC GATE OR QUAD 2INP| |U38|74HC74AM|1|F/F W/CLR&SET DUAL D| |U25|74HC4538M|1|IC MULTIVIBRATOR DUAL HS
USB Serial Adapter @projects:electronics
1 Hits, Last modified:
jects:electronics:usbserial:pl2303_xp2kme98driver_setup.zip|Local copy}} 3.3V Logic ^Wire^Function^ |Y